hydrostar drain monster replacement cable

2021/05/21

If there are chemicals present in the drain, read and adhere to the specific safety measures required to work around those chemicals. Keep one hand on the cable. Excessively corroded Cable should be replaced. The Drain Cleaner motor will stop and Cable and Drum will turn backward until the tension in the Cable is released. If necessary, replace worn or damaged parts prior to using the Drain Cleaner. 1. Check that the receptacle is properlygrounded and test the GFCI before each use. Check for tears and holes in Foot Switch. Release Tension Knob tension and pull the remaining cable from the drain by hand and feed into Drain Cleaner. 2.4% negative feedback. 12 watchers, 0.0 new watchers per day, 507 days for sale on eBay. TO PREVENT SERIOUS INJURY FROM ELECTRIC SHOCK, TWISTED/BROKEN CABLES, CHEMICAL BURNS, INFECTIONS, AND OTHER CAUSES AND PREVENT DRAIN CLEANER DAMAGE: Before each use, inspect the Drain cleaner and correct any problems. Slide the base of the Cutting Tool into the slot at the end of the Cable. With dry hands, plug the cord into a properly grounded outlet and move the Rotation Switch into the FOr position. For Item 61857 (Power-Feed Drain Cleaner), hose off the Power-Feed assembly with clean water. Verify the electrical outlet is properly grounded. Helping You to Do It Yourself! The centrifugal switch requires the motor to come to a complete stop before it will allow the directionof the motor to be changed. It must be understood by the operator that common sense and caution are factors that cannot be built into this product but must be supplied by the operator. After making sure the Rotation Switch is in the FOr position, Tension Knob has been tightened, and the Power-Feed Lever is in the F (down) position, press the Foot Switch to start feeding the Cable further into the drain. If the plug has been modified, is missing the grounding prong or if the cord is damaged, to avoid electrical shock, do not use the appliance until the cord has been replaced by a qualified electrician. Thoroughly flush Drain Cleaner Cable with clean water after every use. Indicates a hazardous situation that, if not avoided, could result in death or serious injury. Proof of purchase date and an explanation of the complaint must accompany the merchandise. For California consumers: more information about our privacy practices. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. If Cable still wont pass obstruction, release the Foot Switch and use sharp downward thrusts to try and pass the obstruction. TO PREVENT SERIOUS INJURY:DO NOT OPERATE WITH ANY GUARD DISABLED, DAMAGED, OR REMOVED. This will ensure that the safety of the Drain Cleaner is maintained. 54 ft Hydrostar Drain Cleaner Replacement Cable & Cutter tool Set Bulb Arrow Cut, PACIFIC HYDROSTAR 68284 Drain Monster 50 Ft. Power-Feed Drain Cleaner 120V 1Ph, 10 Ft Spring Steel Auger Drain & Trap Cleaner Tool Breaks Clogged Traps FREE S&H, 1/2" x 50' Replacement Drain Cable Wire Core; Slotted End (51050SLT), PACIFIC HYDROSTAR 50 Ft. Power-Feed Drain Cleaner With GFCI. This will keep the Cable from whipping when the appliance is turned on. General cleaning, Maintenance, and Lubrication. rubber-soled, non-slip shoes to help prevent slipping and electric shock. If Drain Cleaner Drum is removed or changed, grease bearings with good general purpose grease. Once dry, thoroughly lubricate with lightweight machine oil. If Cable still wont pass obstruction, release pressure from the Foot Switch and use sharp downward thrusts to try and pass the obstruction. Prepare to begin work before turning on the Drain Cleaner. When using an extension cord, the GFCI on the Drain Cleaner does not protect the extension cord. Do not feed the cable through a fixture. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Cables with spaces between the coils should be replaced. Don't get scammed by websites pretending to be Harbor Freight. Once the Cable has been flushed, carefully tip the Drain Cleaner forward to empty out any remaining debris. If necessary, remove fixtures (toilet, sink, etc.) Position the Drain Cleaner so that you can operate the Foot Switch while having one hand on the Cable at all times. It seems to be better than the original cable in my Pacific hydrostar it is 4 years old.

If Cutting Tool stops turning and Cable cannot be pulled from the blockage, release the Foot Switch while holding the Cable with both hands. To prevent Cable from whipping, place Drain Cleaner within 2 feet of drain line or thread Cable through the guide (not included). Do not operate the Drain Cleaner with the belt guard removed. This appliance must be grounded. For a better experience, please enable JavaScript in your browser before proceeding. Run the smallest available tool through the blockage to allow the backed-up water to flow and carry away the debris as the drain is cleaned. Switch Pack Sectional Drum System Kit, 115-Volt 50 ft. Electric Auger with 5/16 in. Continue retrieving the cable until you can pull the cable by hand. As you feed Cable, you may feel and see Cable slow down and/or start to wind or load up (a twisting or squirming motion). Parts may not be interchangeable. Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This helps prevent the appliance or control from slipping during use. Make sure all electrical components are dry and all insulation is in good repair. Make sure Rotation Switch is in FOr position. Do not allow water to get. Make sure the work area is free of flammable liquids, vapors, or dust that may ignite. Unplug from outlet when not in use and before servicing or cleaning. Pull the cable from the drain by hand and feed into the Drain Cleaner until the cable is a couple of feet from the drain opening. Wait for the Drum to stop turning completely before changing the Rotation Switch. Install the Cutting Tool to the end of the Cable. Location: Pomona, California, US, Once you can see the cause of the obstruction, select the appropriate tool for the job. Tools required for assembly and service may not be included. WARNING Read this material before using this product. The Drain Cleaner should be cleaned as needed with hot, soapy water and/or disinfectants. DO NOT USE ROTATION SWITCH IN REV POSITION WHILE REMOVING CABLE FROM PIPE. Condition: New, Model: 63269, MPN: 63269, Custom Bundle: No, Brand: Pacific Hydrostar, UPC: 792363632690, EAN: 0792363632690, Type: Replacement Cable & Cutter Set 1. This could damage the Drain Cleaner and the fixture. This may indicate a change in the drain line (such as a drain trap, elbow, etc. Once Cable has stopped spinning, grab Cable with both gloved hands and pull Cable-free. (See Cutting Tool Accessories on page 9). DO NOT USE ROTATION SWITCH IN REV POSITION WHILE REMOVING CABLE FROM PIPE. Release foot from Foot Switch. Inspect the drain to be cleaned. See More.

Do not work in area until these sources of ignition have been identified and corrected. Verify Foot Switch is attached to Drain Cleaner. evfr{8=?{E}yvIn+xys s([2Nyej. e6)EIgf"{lf||U7$8GzR'F5'_)F]TH_rGetd|lF hV23dp",5g;p~Y7U?K This can be caused by storing the Cable wet or using the Cable with corrosive chemicals (often found in chemical clog removers). Loosen Belt Guard Retaining Knob and slide Belt Guard off. Improper Cable support can allow the Cable to kink and twist and can damage the Cable or injure the operator. You are the salt of the earthYou are the light of the world 54 ft. Pacific Hydrostar Drain Cleaner Replacement Cable & Cutter tool Set , 54 ft. Pacific Hydrostar Drain Cleaner Replacement Cable & Cutter tool Set 2, 54 ft. Pacific Hydrostar Drain Cleaner Replacement Cable & Cutter tool Set 3. This super-strong drain cable is constructed from heavy gauge wire coiled around 49 strand wire rope. ANSI-approved splash-resistant safety goggles and NIOSH-approved dust mask/respirator under the face shield. Indicates a hazardous situation that, if not avoided, will result in death or serious injury. this can cause the cable to twist, kink, or break. Obey all safety messages that. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear, and tear, or to lack of maintenance. 14 sold, 1 available. Before use, inspect gloves to be sure they are free of defects or loose sections that could be caught in the Drain cleaner cable. Replace any cables that have multiple or excessively large kinks. 234+ items sold. Slide new Belt onto the rear of Drum until securely in place. To retrieve cable, set Power Feed Lever in reverse (up) position but make sure Rotation Switch is still in Forwarding position. Determine the correct drain cleaning Cable size for the drain cleaning job.

cautiOn! Specify UPC 193175328977 when ordering for nonpower-feed version. Pretty nice work around. but what a PIA:wink2: Never stop learning (xcep fer speling en typeing): A forum community dedicated to Do it yourself-ers and home improvement enthusiasts.

Note: If the product has no serial number, record the month and year of purchase instead.Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Keep this manual and the receipt in a safe and dry place for future reference. @L0@e"lsB| A temporary adaptor, which looks like the adaptor illustrated in Figures B and C, may be used to connect this plug to a 2-pole receptacle as shown in Figure B if a properly grounded outlet is not available. If the power cord is not long enough, use an extension cord that is in good condition and has a three-prong plug similar to the one supplied on the Drain Cleaner. If Cable cannot be freed by pulling back, briefly turn the motor on in the rEV setting to free the Cutting Tool. Press the reset button. To reduce the risk of electrical shock, do not put the motor or cord in water or other liquid. Keep extension cord connection dry and off the ground. Slide new Belt onto belt pulley above Drum. Allow the motor to cool off completely before restarting and stay clear of the cable when turning the motor back on.2. Use appropriate personal protective equipment while handling and using Drain Cleaner. Note: If the product has no serial number, record the month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are notavailable individually as replacement parts. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. NOTICE: If the cause of the obstruction is unknown, use the Boring Bulb Cutter to explore the obstruction and, if possible, retrieve a piece to inspect. Once the drain is flowing, more appropriate tools can be used on the rest of the blockage. Do not use a glove you are not currently wearing or a rag to hold the rotating cable. Remove old Cable by pulling Cable completely out of Drum. If possible, visually inspect the drains quality before operation. Wear ANSI-approved splash-resistant safety goggles, NIOSH-approved dust mask/respirator under face shield, and heavy-duty LEatHEr gloves, and other appropriate protective equipment when setting up the Drain cleaner. Once Cutting Tool is free of blockage and is turning again, slowly feed the rotating Cutting Tool back into the blockage. Products shown as available are normally stocked but inventory levels cannot be guaranteed, For screen reader problems with this website, please call 1-800-430-3376 or text 38698 (standard carrier rates apply to texts), M18 FUEL 18-Volt Lithium-Iron Cordless Plumbing Drain Snake Auger Kit with w/ CABLE DRIVE & 5/16 in. The pneumatic Foot Switch may have a leak. Keep children and bystanders away while operating a Drain Cleaner. A three-prong or GFCI outlet may not be properly grounded. Step on the Foot Switch and continue feeding the Cable into the drain. NOTICE rotation switch controls the rotation of the drum only. INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS. . Do not force cable. If the Cable becomes lodged (for example: in a narrow part of the drain, in a drain trap, etc. Loosen the Tension Knob, then grab the Cable with both gloved hands and push the cable into the drain until at least one foot of Cable is in the drain. Only one person should feed cable and operate Foot Switch. Do not unplug by pulling on the cord. Rotate the Drum and make sure that it turns freely without binding. Release Foot Switch and turn the Rotation Switch to OFF position. Do not operate the Drain Cleaner if it is sitting in standing water, or if the operator is in standing water. Whenever the adaptor is used, it must be held in place by the metal screw. Figure B: Grounding adapter, The temporary adaptor should be used only until a properly grounded outlet can be installed by a qualified electrician. Need Help? With the Drain Cleaner off, pull the Cable out of Drum with both gloved hands and feed into the drain. With dry hands, plug the Drain Cleaner into a properly grounded outlet. isk of shock! Good seller with good positive feedback and good amount of ratings. Fingers can get caught between the drive belt and pulley. s8q4UvFzRR%/"M9Si0i]" y]I&H"Q"t5%kc4\[AS6#y)fvG#k9B*J*DQ(ZklJv41L v]Dl/h0?.z|#"X4dHyxYXY2Z4!.8^K7"(+^)fKqhqH e^MB?/*~`ca`ko.QMZ$v"Dvd$K8K8\3 If the outlet is not GFCI protected, use a plug-in type GFCI between the outlet and the extension cord. 1. Other uses or modifying the Drain Cleaner for other applications may increase the risk of injury. Quickly release tension if it starts to build in the cable. The adapter should not be used if a three-slot grounded receptacle is available. Also, make sure the Rotation Switch on top of the Drain Cleaner and Power-Feed Lever are within reach. P43xDoAQdd1xy8Cs/OB To disconnect, turn all controls to the off (O) position, then remove the plug from the outlet. Read all the instructions before using the appliance. This durable, flexible drain cleaner cable comes equipped with four interchangeable cutter heads. Limitations apply. Warranty void if the cable is damaged from allowing the motor to twist excessively against a blockage, or if the drum is run in reverse long enough to unwind cable. cloth materials can tangle in the rotating cable, leading to serious personal injury. It's just that simple! ci"!] rIUq"oW`1=0;xx`82BE'NgD*Q%gB1rrD%?FL To prevent Cable from whipping, place Drain Cleaner within 2 feet of drain line or thread Cable through the guide (not included). Tighten Belt Guard Retaining Knob to lock Belt Guard back into place. Verify Drain Cleaner is properly assembled. Plug the GFCI Power Plug into a grounded, 120 VAC electrical outlet. Stay alert, watch what you are doing, and use common sense when operating the Drain Cleaner. You must be able to hold and control the Cable, control the Foot Switch, and reach the Rotation Switch. on HYDROSTAR 68284 50 Foot Drain Cleaner Owners Manual, Honeywell USB Cable Retainer Instructions, ifi Cable Series 4.4 to XLR Cable User Manual, IKEA 904.408.63 NGARNA LED Table Lamp Instruction Manual, Pocket Juice Portable Charger AC 10K User Manual, IKEA 802.228.27 MSTERLIG Hob/Booster Instruction Manual, adastra RMC120 Series Rackmount 100V Mixer-Amplifier with CD player User Manual, ZERFUN G8 Pro Wireless Microphone System User Manual, Airrex Infrared Heater AH-200/300/800 User Manual, 2017 Toyota Camry Hybrid LE Fuse Box Diagrams, 2017 Mitsubishi Lancer 4WD Fuse Box Diagrams, Mitsubishi Lancer Passenger and Engine Fuse Box Diagram, Mira Honesty ERD Bar Valve and Fittings User Manual, This is the safety alert symbol. If unreadable or missing, contact Harbor Freight Tools for a replacement. Do not keep the cable rotating if the cutting tool is lodged in a blockage. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:turn the rotation Switch of the tool to its position and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool. This will keep Cable from hazardously whipping when activating the Drain Cleaner. Dry Drain Cleaner before storing or using again. If the motor cant pull Cable out, release pressure from Foot Switch and allow Cable to stop spinning. DO nOt uSE rOtatiOn SWitcH in rEV pOSitiOn WHiLE rEMOVinG caBLE FrOM pipE. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. The motor does not operate orthe Foot Switch sticks. If any section of the Cable is worn or flattened, replace Cable before use. To restore power after TEST, push the RESET button. 54 ft. Pacific Hydrostar Drain Cleaner Replacement Cable & Cutter tool Set . If the Cutting Tool stops rotating, the operator must turn the Drain Cleaner motor off quickly.

INJURY: Do not operate the Drain Cleaner without the Belt Guard in place. The green-colored rigid ear, lug, and the like, extending from the adaptor must be connected to a permanent ground such as a properly grounded outlet box cover. Get 10% Off Your Entire Purchase When You Open a New Account, Get our best deals and latest news delivered straight to you. 54 ft. Pacific Hydrostar Drain Cleaner Replacement Cable & Cutter tool Set . x 35 ft. Cable, M18 FUEL 18-Volt Lithium-Iron Cordless Plumbing Drain Snake Auger with w/ CABLE DRIVE & 5/16 in. Choose a firm, stable location for the appliance and operator that will remain relatively dry.

Fasten together using a screwdriver. Check for leaks in the airline leading from Foot Switch. This will reduce the risk of shock if there is a fault in the extension cord. This will keep Cable from hazardously whipping when activating the Drain Cleaner. We have invested millions of dollars in our own test labs and factories, so our tools will go toe-to-toe with the top professional brands. Risk of Electric Shock. x 50 ft. Slotted-End Replacement Cable, M18 Fuel 18-Volt Lithium-Ion Brushless Cordless Drain Cleaning 3/8 in. Owner's Manual & Safety Instructions (PDF). Locate on a flat, level, and solid surface that is capable of supporting the weight of the Drain Cleaner. Turn the switch to the off-position before plugging in. If the Cable becomes lodged in a narrow part of the drain or in a drain trap, allow the Cable to try and work itself past the obstruction. Do not reach into Drum unless the Drain Clean power cord is unplugged. Once the tool is free of blockage and is turning again, slowly feed the rotating Cutting Tool back into the blockage. Before use, inspect gloves to be sure they are free of defects or loose sections that could get caught in the Drain cleaner.

Warranty void if the cable is damaged from allowing the motor to twist excessively against a blockage, or if the drum is run in reverse long enough to unwind cable. Once the Drain Cleaner is assembled, check the appliance and Cutting Tools for any signs of wear and damage. Keep all connections dry and off the ground. Verify the extension cord has sufficient wire size (16 AWG for 50 or less, 14 AWG for 50 100 long). TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:Turn the rotation Switch of the tool to its position and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool. Connect to a properly grounded outlet only. Maintain labels and nameplates on the Drain Cleaner These carry important safety information. Put Power-Feed Lever in up (R) position to pull Cable back and free Cutting Tool from blockage. 6B|!Lzy,(J Do not wear cloth gloves or loose clothing, or use a rag to grasp the cable to prevent entanglement. 2000-2022 Home Depot. Write the products serial number in the back of the manual near the assembly diagram (or month and year of purchase if the product has no number). Latex, rubber, or other liquid barrier gloves under heavy-duty LEatHEr work gloves. Item: 124622304936 Drains may contain chemicals, bacteria, and other substances that may be toxic, infectious, cause burns or other issues. Corrosion weakens the Cable, making it brittle. Do not use a glove you are not currently wearing or a rag to hold the rotating cable. Warranty void if the cable is damaged from allowing the motor to twist excessively against a blockage, or if the drum is run in reverse long enough to unwind cable. Parts may not be interchangeable. Excess tension will cause the Cable to twist, kink, or break. H2 HE{K"2R>g=OHJX1d$d]1!Uz4{DD{ _u a X(YO",Zy7lY/ Undersized wires can overheat, melting the insulation or causing a fire or other damage. 1. I just rewired my Harbor Freight drain cleaner to swap FWD and REV so this post is mostly to keep note of it in case anyone on the internet is searching for the same thing since I couldn't find anything except a thread on. Before use, fully retract the Cable with no more than 2 of Cable outside of the appliance. tj@E x 35 ft. Cable, ONE+ 18V Hybrid Drain Auger Kit with 50 ft. Cable, 2 Ah Battery, 18V Charger, and Accessories, 5/16 in. Sparks can be generated during Drain Cleaner operation. After inspection, set the Rotation Switch to OFF, dry off your hands, and unplug the Drain Cleaner. Warranty void if the cable is damaged from allowing the motor to twist excessively against a blockage, or if the drum is run in reverse long enough to unwind cable. Greater distances can result in the Cable twisting or kinking. If needed, set up barriers to keep bystanders away from the Drain Cleaner and work area during operation. Avoid unintentional starting. rubber-soled, non-slip shoes can help prevent slipping and electric shock, especially on wet surfaces. Also, verify that the extension cord is rated for outdoor use and contains a W or W-A in the cord designation (i.e. NOTICE The rotation switch controls the rotation of the drum only. Make sure that switches and handles move smoothly between positions and lock in place. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Warning! When unpacking, make sure that the product is intact and undamaged. If GFCI trips again have appliances serviced by a qualified electrician before further use. Doing so will help prevent the build-up of sediment and any drain cleaning chemicals still in the cable. Look for spaces between the Cable coils. 26541 Agoura road Calabasas, ca 91302 1-888-866-5797, USB Cable Retainer Instructions Honeywell Scanning & Mobility 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.com USB, DRAIN HOSE INSTALLATION , Netgear CM600 Cable Modem Manual - Optimized PDF Netgear CM600 Cable Modem Manual - Original PDF, Cable series 4.4 to XLR cable 4.4 to XLR cable Meet the iFi 4.4mm to XLR cable, created. if abnormal noise or vibration occurs, have the problem corrected before further use. use reverse directiononly momentarily for relieving pressure or untangling cable from a blockage. Do not use the appliance while standing in water. Slide Belt Guard pack into place. Gradually work the Cable as far into the drain as it will go. Seller: bzmoniso (234) 97.6%,

This will help prevent contamination with toxic or infectious material. The Drum should rotate clockwise when seen from the front of the Drum. If so, immediately turn off, let the tension release, and then pull back on the Cable to free the Cutting Tool from the drain blockage. Kinking, stretching (pulling Cable by hand), or running the Cable in reverse can deform the Cable. Check for signs of excessive corrosion. Contact the chemical manufacturer for required safety instructions and information. See Cable/Pipe Size chart below. Continue to slowly feed the Cable until the Cable reaches the blockage. In the event of malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. Do not put too much stress on Cable. Failure to do so can result in serious injury. Let Cutting Tool do the work. Appropriate personal protective equipment always includes ANSI-approved safety glasses and heavy-duty LEATHER work gloves. Addresses practices not related to personal injury. Inner Core Cable, ONE+ 18V Hybrid Drain Auger Kit w/ 50 ft. Cable, Battery, Charger, & Accessories with 50 ft. Auger Replacement Drum. Once the drain is clear, turn on the faucet or use a hose to flush the debris out. TO PREVENT SERIOUS INJURY FROM TWISTED OR BROKEN CABLES, CABLE ENDS WHIPPING AROUND, APPLIANCE TIPPING, CHEMICAL BURNS, INFECTIONS, ELECTRIC SHOCK, AND OTHER CAUSES:Follow operating instructions for your model explicitly. use reverse direction only momentarily for relieving pressure or untangling cable from a blockage. When working with larger sewers or septic tanks, minimize the amount of cable fed to prevent kinking and knotting of cable.

SAVE THIS MANUAL. Do not force cable. Roof stacks and small floor drains (no roots), Roof stacks, laundry lines, and small drains (no roots). Verify Drain Cleaner is unplugged and inspect the power cord, Ground Fault Circuit Interrupter (GFCI) and plug for damage.

Sitemap 27

- le creuset enameled cast iron safe

preserved eucalyptus branches