Ill be using them time and time

2021/05/21

Ill be using them time and time again. bumpers 4runner winch The 5th Gen 4Runner rear bumper package is the best that CBI Off-Road Fabrication offers to take your 4Runner to the next level. If you have a Trail/TRD Offroad or TRD Pro model, the cut follows the plastic valence that is attached to the bumper. Thanks, Tom! Wasn't sure about the build quality when I ordered this thing. For options, you can choose between no bull bar, a mid-height bull bar, or a full height bull bar with gussets. Installation of the cooler kit is straightforward and does not require draining the power steering system. Relentless Fabrication makes another low-profile build for the 5th Gen 4Runner. Expedition Ones front bumper is compromised of 3/16 and 1/4 inner structure and a 3/16 outer structure, weighing in at 150lbs. Anyone in Sacramento area who gets a full bumper and wants to sell their TRD or sr5 front bumper hit me up. It is made out of5052 H34 1/4 aluminum and weighs an amazing 59lbs without being powder coated.

this is a long shot but ive been searching for bumpers and i really like the C4 FABRICATION OVERLAND bumper but unfortunatly i need one for a 98 Subaru outback legacy. This builds is compatible with most 8-10k lb winches, with fairlead cutouts for access to your winch. I have a 2020 trd pro 4runner and am looking for a front bumper with bull bar, Im having trouble finding one that doesnt interfere with the radar. This could be a stupid question but I have looked everywhere and cant find an answer so here it goes- why cant a bumper marketed for 2014+ fit on a 2010-13 model?

This Lo Pro is a solid choice if youre looking to add a winch, have a little more protection, and not a lot of weight. 4runner stubby trd sr5 It is rather clunky and designed to work when you are in extreme conditions. ive got a 2015.. This bumper is CNC cut out of 3/16 and 1/4 plate steel. For this bumper, the grille hoop is standard and can not be removed (maybe give them a call). They flare slightly outside the fender line to keep it safe from damage on the road or the trail. Bummer on both. It is available for all 5th Gen years. Replaced my Toyota shocks with Bilsteins. This allows you to add a winch to the front valance with minimal work to install. 2018 TRD OffRoad. Check out this article by Kevin who did a front end conversion from an early to late model 5th Gen 4Runner bumper. Is there a bumper for a Limited model similar to the C4 Fab 2014+ 4Runner Lo Pro Take a look at Victory 44 too! Fantastic article! Yes, you will need to cut out the plastic center section of the bumper to install the SSO Slimline. For powder coating, you can get it done in Flat-Black, Semi-Gloss Black, Red, Yellow, Blue or you can specify another color you want when ordering for the same +$241 price. You can also add a license plate mount and a center led bar cut out. Email Mike at Dobinsons USA. They missed the Relentless off road version, which IMO is better looking and more functional than all of these. Both the tubular Hybrid Series and Overland Series bumpers share the same center structure that bolts to the front of the 4Runners frame using 1/4 mounting plates. The Stingray is made with 3/16 CNC cut steel and features 3/4 thick through-welded steel recovery points. What is the difference and is there a way to overcome it? The aluminum option weighed 62lbs and came with square fog cutouts. Hope it helps. I love ARB, but they need to design according to the cars lines, not squared off. The 5th Gen. 4Runner rear bumper package is the best that CBI Offroad Fab offers to take your 4Runner to the next level. Both full-length options they make are badass. which bumper will fit. This is made for the 2010-2013 early model 5th Gen 4Runner. This is not a list from best to worst. Lol, rear bumper is actually close. We will never spam your inbox. It also features holes for a front license plate that allows you to cover up the hole if a winch is not used or if you need a front license plate in your state.

Winch capable up to 10k lb with a non-integrated solenoid. This design can also add a grille bullbar/hoop which is also a modular option as well. Credit: General Overland(R1 Option Pictured). 4runner toyota bumper stealth winch metal Thnx 4 now. Relentless Fabrication doesnt show the STINGRAY in their website and they dont respond to messages. You are better off leaving both sides of the bumper and inner fender liner un-bolted until the bumper bolts are tight. The R1 weighs 140Lbs, The elite weighs 220Lbs, and the slimline has an unknown weight but due to its specifications, we are assuming it is around 60+lbs. Done, moved all the lower profiles up top.

It is made out of the same thickness of steel and hrew tubing so it weighs almost the same. A small, but important detail that many bumper manufacturers choose to ignore. Also, for the Southern Style stage 1, is cutting the bumper required (if you know)? The Rago Fabrication Low Profile Bumper is constructed from 3/16" steel. Not sure when or if C4 has something like this coming out in the future. After getting in contact with Victory 4x4 about the condition of the bumper I had received previously it showed how they are a quality company. 4runner 2001 sr5 filler apron Only one complaint, the logo in the middle of the lightbar. CNC cut and formed from .188" steel or .250" aluminum.

Everything from the brackets to the harnesses and the clips to the actual plastic bumper pieces of the body are, for the most part, all different. This is a list of the top 15 most common options. We will also never sell out and sell your data.

The optional hoop is made from ring rolled tubing. Kick ass customer service, lower lead times, military discount, and they offer powder coating for a reasonable charge! If you have a SR5 model, they provide a template for the cut. REQUIRES TRIMMING I really havent had any dissatisfaction with the Stingray or Relentless Fabrication, though. This is the "No Grill Protection" varia CBI Off-Road Fabrication 4Runner Front Bumper with Low Center Grill Protection. Ive got a limited and have the same problem.. can you really switch out the bumpers for another model of the same year? Pelfreybilt has filed for Bankruptcy, so I would delete them from the list. Two pieces for under headlights. Our content is pretty fire! 44 labs can be used with stock fog lights or rigid srq led lights. asking for a noobme, Looking front bumper 4 runner that will fit limited edition 2018. I just checked the Hefty site to determine where you are looking at. No. The subframe is built of steel to add increased strength and the aluminum face is to provide a light weight element. The best part about custom fabrication is that they are one-off builds. For example, RCI offers a filler plate when using their skids, but this only mounts up to the stock bumper, not aftermarket. New to the line-up is their front tube winch bumper. The bumper is available in a 2 stage satin textured black powdercoat over durable zinc primer finish, or in bare metal. Whether youre into rock crawling, trail expeditions, or just good ol weekend fun our Baja Series front winch bumper provides the ultimate protec CBI Off-Road Fabrication Toyota 4Runner front bumper made for the 2010-2013 early 5th Gen 4Runner models. I have a 2015 trd with the TRD shocks. Now for the first full-length design, it is available for all years 2010-19 and for all models. It is offered in bare steel, black powder coating +$90, or white powder coating for +$140. ), Tubework versioncompatibility with Toyota Safety Sense equipped. It comes in an all-aluminum version which, while the weight difference is not listed, maybe 60/75lbs. Depending on the winch and lights you add to the bars it can be almost 250lbs of front end weight added to your 4Runner. The bumper also includes the ARB LED indicator lights and clearance lights for both2010/13 and 2014+ models. Vendor specials, free gear, giveaway notifications, group buys and more! Where/who makes a bra for a 2021 TRD 4 Runner? Now for the late model 2014-2019 models. Yes, another low profile design. You will not have to worry about this with ARB. any recommendation of shops for custom fabrications in the socal area? The bumper was shipped back easily via Fedex to Victory 4x4 and the damage was corrected. The only one Ive seen that has the bars conform to the exact structure of the headlights. The original just got better! Hi!! The stage 2 high clearance also comes powder coated the same black as the Hybrid. The springs were about $200 and the socks not much more. As the name states, it features a bull bar along with headlight guards which is great for offroading. I guess if you have a 2010-13 runner youre options are severely limited! That is what Im looking at too. Im trying to determine which bumper is the lightest and easiest to install. The Relentless Stingray features similar options as well. Since there are 4 total designs that Demello makes were going to keep it short and simple. For the winch plate, it will fit most of your typical winches that have the normal 104.5 mounting pattern.

The steel option weighed 130Lbs and also came with the same configuration. This aluminum 3-hoop weighs a whopping 50/60lbs (estimated) and still can hold a winch and additional lighting. It consists of Discount Codes. Without the expensive led lights, this would be an affordable choice for someone wanting full protection. Michael Devecchio (@mammoth4runner) Addicted Offroad. It also allows the choice to add extra lower lights. Listed weights are with no tubing; single hoops and prerunner tube work add roughly 10 lbs in steel, 5lbs in aluminum; full grill and light protection tubing adds 30 lbs in steel, 15lbs in aluminum. Install is not simple, but can be done by one person, with only occasional assist.

The only difference between them is the weight of the steel 3-hoop due to materials. wrayplummer@gmail dot com. All of the welds were spot on, I ordered it bare and had it powder coated at a local shop and it came in within the lead time specified. Made out of CNC cut P&O 3/16 steel, features 3/4 weld through shackles, and weighs around 75lbs. Very very impressed with the build quality of this bumper. The Expedition One is one of the better choices on the list due to its build quality but does come in at a steep price. great product for my 2010 SR5. Build quality is excellent! After 2 years of development we are excited to offer it to the masses. You just need to piece together your set-up on this option. These 2 words have 2 different definitions. Fits all 2014-2022 4Runners except the Limited model Looking for answers to common questions about us or our products? the directions were good, but there was some extra steps/liberties that were needed when reattaching all the gravel guarding, and wheel well protection. Remove the headlight guard which saves you $20. I have a Limited and hate its looks. Very good write-up of the Front Bumpers. The Proline low profile is known as the Pro-X only has choices for lighting and powder coating as well. Many shops can make you front-end protection much cheaper and at the same quality as any mainstream fabrication companies.

BudBuilt 5th gen 4Runner hidden winch mount 2010-13. Chris was my point of contact during the resolve. I do entry level off-roading and dont want to commit yet to one but what the extra clearance. If you are looking to keep the factory appearance while gaining more clearance in the front for larger tires, this is a pretty cool design. Similar to the C4 Fab and SSO bumpers. Shrockworks also features a hidden winch mount that accommodates most non-integrated solenoid winches up to 9500 lbs. The flattop steel and the same version with single hoop both use the same measurements of metal as the steel 3 hoop. Thought they were coming with all TRDs. Only CBI Off-Road Fabrication Toyota 4Runner Front Bumper with Full Grill Protection. I went with the SSO slimline hybrid but I had no idea they came out with a stage two add on. We have the first design with only a center hoop guard. It comes un-powder coatedC4 fab currentlydoes not offer powder coating. C4s entry into the plate bumper category builds on the beefy center section with the addition of 3/16 laser cut P&O steel wings that form a flat cutoff through the existing front clip. The R1 and the Elite include optional powder coating and lighting. Mine are the Bilsteins used by Toyota for the TRD. It also features 2 shackle mounts for D-rings, a winch mount that can hold a 9500Lb non-integrated solenoid winch, and vertical slots for cooling/air circulation. They also protect the front corners of the vehicle from impacts with rocks, trees, or road-crossing animals. Custom bumpers can be a good option as well. For additional coverage and protection, the Overland Series bumper offers a skid plate for the venerable washer reservoir to shield it from debris and obstacles. PLEASE ALLOW 14 WEEKS PRODUCTION TIME. You say that the Slimline aluminum weighs in at 33.5lbs (Only 19lbs heavier than stock once installed). But on the Slimline website Im digging around for one that weighs less than 60 lbs. Trying to figure out which way to go. Just to add for consideration as a hidden winch mount bumper in aluminum. I am happy with the product and has worked really well for my needs. Will the Carid Armordillo bull bar interfere with sensors on 2020 4Runner TRD off road Venture? Installing this bumper also we provide with the bumper. Great fitment, there is a couple extra steps for the 2021 4R. You made me nervous about the suspension. Either the HF tube bumper or something built locally by Stellar Built in Sacramento, who knows though. The actual metal used for the bumper is 3/16, 1/4 and 1/2 steel while only weighing 137Lbs. Any help is greatly appreciated. You can cut your factory bumper to have the upper half fill the gaps. With this being said, ARB has taken serious thought in planning for the future in the 2014+ models. Thanks. Im looking to try and keep the factory look as much as possible with minimal cutting. It comes standard with semi-gloss black powder coating. One cool feature is their interchangeable grille inserts. I had to do the replacement front shocks because the old shocks had insufficient travel. Makes it so much easier to decide on what to upgrade to. Demello offers steel gap filler plates.

Looking to do the LE to Pro front end swap. This design comes raw steel ready to be powder coated. Yes, both frames are the exact same so you could technically take your entire front bumper off of an early model 4Runner and mount any bumper on to it however the plastic bumper and headlights surrounding the new aftermarket bumper wont fit. Product Weight: 35lbs over stock (Total weight about 55 lbs), Proline has dropped off the face of the planet and people have pending orders apparently that have not been filled. INTEGRATED LIGHT BAR MOUNT ( FITS UP TO 30 IN, DOUBLE ROW) No one else will have your design. The SSO slimline is similar to the C4 Fab Lo Pro. Might be a little better to separate the low-pro bumpers from the full replacements, but still a great write-up! Bottom line, great bumper! Maybe someone out there can build you something similar. It features 3/4 welds through shackle mounts along with a 10,000lb winch mount capacity. Instead of waiting 6-12 weeks for a bumper, you can have one built just for your truck and installed in a few days. Chris reached out after my review to help assist me with the damage on the bumper. The front aluminum plate is mounted onto a steel subframe. Im definitely going to be adding that now. It is so close to being perfect, but for some reason the lines don't match my '22 TRD ORP. do you guys know if you could make one for the subi or have any rcommendations? Comes Gain more clearance at the front of your 4Runner to give more room for larger tires and create a better approach angle to large obstacles.High Clea Add maximum protection, functionality, and an aggressive look to your 4Runner with the CBI Off-Road Covert Bumper.

Not yet. Then we have the second that features headlight guards. Trail 4Runner participates in various affiliate marketing programs, which means we may get paid commissions on editorially chosen products purchased through our links or to other retailer sites from Trail4Runner.com. One of the biggest problems in the off-road world is you get fly-by-night companies that dont stand behind their products.

The price difference includes a front hoop for an additional +$50.00 weighing in at 15lbs, Powdercoating for $241 any color, and LED lights for $600. This will help you understand the difference in parts and pieces needed for both bumpers. The ARB also features a recessed winch control box along with a textured black powder coat, as opposed to the old satin finish. https://c4fabrication.com/collections/4runner-2014. Put it on thick and durable. I have the SSO Slim Line on order and from your article, I am very happy I did so. 2414 W. 700 S. STE 400 SPRINGVILLE, UT 84663, ** total_quantity ** | ** unit_price ** / ** unit_measure **, C4 Fabrication 4Runner LO PRO Winch Bumper (2014-2022), C4 Fabrication 4Runner 2014+ LO-PRO High Clearance Additions, CBI 4Runner Covert Front Bumper / Baja Series (2014-2022), Southern Style 4Runner Slimline Hybrid Front Bumper, Southern Style 4Runner Slimline Hybrid Stage 2 High Clearance Side Protection, CBI 4Runner Swing Arm Series 4Runner Rear Bumper (2010-2022), C4 4Runner 2014-Current Hybrid Front Bumper, CBI Adventure 4Runner Front Bumper (2014-2019), C4 Fabrication 4Runner Overland Series Rear Bumper 2010-Current, CBI Classic 4Runner Front Bumper (2014-2019), CBI Baja Series 4Runner Front Bumper (2014-2019), CBI Baja Series 4Runner Front Bumper (2010-2013), CBI Adventure Series 4Runner Front Bumper (2010-2013), CBI Classic Series 4Runner Rear Bumper (2010-2022), CBI 4Runner Adventure Front Bumper 5th Gen (2020-2022), CBI 4Runner Classic Series Front Bumper 5th Gen (2020-2022), C4 Fabrication 4Runner Backup Camera Relocation Kit, Rago Fabrication 4Runner Low Pro Bumper + Wing Bundle 5th Gen (2014+), ARB Summit Bumper 5th Gen 4Runner (2014-2022).

For the late model design, you can choose between no bull bar, just the grille bar or a full grille and headlight bar assembly. If you're on the fence about one, Pull The Trigger! FPO/AP) stationed in Guam. Demello offers a few designs for the 5th gen. An aluminum 3 hoop, a steel 3 hoop, a flattop steel, and lastly a flattop steel with a single hoop. . Thanks for the detailed write up! 21 has one loom to both fogs remove it or you will cut right threw it.

Pelfrey Bilt offered steel and aluminum full-length design for 2014 and newer models. I checked a lot of manufacturers and by far the Victory low profile bumper looks best on my 3021 TRD pro 4 Runnerthe Warn winch fits inside the bumper great the bumper itself is nearly flush with the body lineI highly recommend I did have it installed by a professional but feel it could be done the owner. Both the singular hoop and bull guard come with two light tabs on the top face of the bumper for 6 to 8 lights. Cutout and mounting tabs designed to work with Baja Designs S8 30 light and Rigid SR series 30. C4Fab doesnt make bumpers for early 5th gens; the only other option would be Victory4x4 and other Chinese manufacturers. It mounts underneath the grille and provides protection to key areas without adding that extra weight like a full-length build. The bumper itself is not the traditional full-length but instead a steel replacement for the center plastic valance underneath the grille.